Controller DC 12V MCU Temperature Controller -50~110 Celsius Degrees Temperature Difference Controller Micro Digital Thermostat

Technical Parameters:

• Temperature control range:-50~110 °c
• Input Power: DC 12V
• Resolution: 0.1 °c (-9.9°c to 99.9 °c), 1 °c (other range)
• Measurement accuracy: 0.1 °c
• Backlash accuracy: 0.1 °c
• Control accuracy: 0.1 °c
• Output: 1 relay output, capacity = 10A
• Measuring inputs: NTC (10K 0.5%) Waterproof sensor
• Power consumption: Static current: < / = 35MA; Attract current: < / = 65MA
• Refresh rate: 0.5 s
• Size: 48.5*40.5

• Connect the power supply and equipment, the measuring temperature is displayed, press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease), press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads,
• LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
• Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm
• Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P6,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.

• P0 :Cooling / Heating; Range: C/H; Default: C
• P1 :Hysteresis Setting; Range:0.1-15; Default: 2
• P2 :Highest Setting Limit; Range:110; Default: 110
• P3: Lowest setting Limit; Range:-50; Default: -50
• P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
• P5: Delay Start Time; Range:0-10 Minute; Default: 0
• P6: High temperature alarm; Range:0-110; Default: Off
• When the Thermostat is power off, long press "- or +", you can restore the factory settings

• 1x Digital Temp Controller