Dual Output Power Supply Module DC 4.8~40V to ±15V Power Converter/Voltage Regulator/Adapter/Driver Module

  • Item ID #2001708005
Qty.:

List Price: $17.50 Our Price: $6.80Save 61%

Price(per unit)
1-4
$6.80		 5-9
$6.46		 10-19
$6.12		 20-29
$5.78		 30+
$5.44
Buy More: please contact us

It is a Power Converter/Dual Output Power Supply Module, Input Voltage: 4.8~40VDC, Output Voltage: ±15VDC, Application: suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output.


Other Products in DC Buck/Step Down

page 1 of 2 Previous Page Next Page
Characteristics:
  • 1 Function: this module can convert single power input to the positive-negative power output.
  • 2 Wide voltage range：the input range is 4.8~40V DC, and you can easily get ±15V output.
  • 3 Ultra-small size：the size of the module is 64*27.5*12.5mm, easy to install. It can be installed in many ways.
  • 4 Protection function: with short circuit protection, it has self recovery.
  • 5 Application: suitable for sensor, operational amplifier, audio and other devices that needs positive-negative power output.
Parameters:
  • Input Voltage: 4.8~40V DC
  • Output Voltage: ±15V DC
  • Rated Current: 660mA
  • Convert Efficiency: 88% (24V input at VIN）
  • Minimum Load: 30 mA
  • +/-Vo Ripple Noise of Bare Metal: 90mV/80mV
  • Ripple Noise: 35mV/30mV (test condition: 24V input at VIN, bandwidth limit of 20MHz, full-load output)
  • No-load Power Consumption: 530 ~ 550mW
  • Short Circuit Protection: YES (the circuit can be self-restored from short circuit, but it does not support long continuous short circuit)
  • Working Temperature: -40 ~ +85℃
  • Dimension: 64 x 27.5 x 12.5 mm
Port Function:
  • VIN: positive of 4.8~40VDC voltage input
  • GND : common ground connection port for input and output
  • +Vo : output +
  • -Vo : output -
  • EN : Module enables: VEN<0.8V, module doesn’t work; 1.4V<VEN<VIN or when EN doesn’t connect to any wire, module works normally.
  • Installation:
  • 1.Pin-type welding of embedded PCB board.
  • 2.Lead terminal installation.
Note:
  • 1. Voltage of EN and voltage of VIN should be different, or it may cause unstable output.
  • 2.For low voltage input, user needs to refer to the curve of output derating use.
Package Includes:
  • 1 x ±15V Dual Output Power Converter Module ( Power Supply Module/Adapter )

Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed